Building a house, adding a family room or putting up a garage off Main Street? New roof installation in Englewood starts the day the framer finishes the sheathing, and how fast that deck gets covered decides whether the rest of the job stays on schedule.
Rich Roofing & Services handles roofs on structures that have never had one. If you already own a house whose roof is curling or leaking, you want a roof replacement in Englewood, which begins by tearing the old one off. Different job, different page.
Open ground along the Stillwater River and around Englewood MetroPark gives spring storms room to push wind at a fresh roof edge. On a new build, that is a good reason to fasten edge metal and starter courses with care.
We are not the builder. We are the roofer the builder, or you, can count on to show up when the frame is ready and leave the roof ready for the next trade.
Roofing for New Homes, Additions and Garages in Englewood
Here is what a new roof installation in Englewood usually covers for us:
Houses built from the ground up
- Single-family homes on new lots, roofed as soon as the trusses and sheathing pass the builder's check.
- Custom plans with hips, valleys and dormers, laid out so water has a clean path off every plane.
- Shingle, metal and low-slope sections on the same house when the design calls for it.
New commercial and light industrial buildings
- Shops and offices along the SR-48 corridor, roofed on the general contractor's timeline.
- Buildings near the I-70 interchange with low-slope roofs, drains and curbs for rooftop equipment.
- Larger jobs are handled with our Englewood commercial roofing crew.
Additions
A home addition roof is the trickiest small job there is. It has to meet the old roof at the right height, carry water past the joint, and look like it was always there. Whenever we can, we plan the tie-in before the addition is framed.
Garages, workshops and sheds
Detached garages and backyard shops are new structures too, and they get the same drip edge, underlayment and flashing as the house beside them.
Things worth deciding before drywall
- Attic ventilation: how much intake at the soffit, how much exhaust at the ridge.
- Where plumbing vents and bath fans will exit the roof, so they stay out of valleys.
- How much insulation the attic will get. Our attic insulation services in Englewood can be scheduled within the same build.
How we price new work
- A free estimate built from your plans or a site visit.
- Upfront line items for materials and labor.
- No change in price unless the plans change.
Why the Roof Comes Right After Framing on Englewood Builds
A frame without a roof is a frame getting wet. Here is what getting the roof on early does for the rest of the project:
Drywall and wiring start sooner
Once the house is dried in, the inside trades can work whatever the weather does.
Sheathing stays flat and sound
Plywood and OSB that sit through a couple of storms can swell at the edges. Covered quickly, the roof decking stays flat under the finished roof.
Fewer weather delays
Spring thunderstorms roll through the Stillwater valley on short notice. With underlayment and drip edge already down, those afternoons do not stop the job.
Fewer callbacks
Flashing done while the walls are open is better flashing. Sidewall, kick-out and chimney flashing all go in before siding covers the edges.
One clean handoff
When we leave, the roof is ready for gutters and siding. Our gutter installation team in Englewood can hang the gutters next.
A choice you only make once
Shingles or metal? On a new house you get to choose freely. Our page on metal and asphalt roofing in Englewood walks through the trade-offs.
From Bare Trusses to Finished Roof: Our Englewood Sequence
Every new roof installation in Englewood follows the same order, whether it is a garage or a two-story house.
Reading the Roof Plan With Your Builder
Pitches, overhangs, valleys and every opening. We spot details that will be hard to waterproof and suggest fixes while they are still lines on paper.
Holding a Start Date Tied to Framing
We book the job against the framer's finish date, then confirm a few days ahead. If framing slips, we slide with it.
Deck Walk Before Anything Covers It
Nailing, panel spacing and edges get checked. Any sheet that swelled or split gets pointed out to the builder and fixed before we start.
Drip Edge and Underlayment the Same Day
Eave drip edge, ice and water barrier at the eaves and valleys, underlayment across the field, then the rake edge. At that point the building is dried in.
Finish Roofing, Flashing and Vents
Shingles, panels or membrane go on with step flashing at walls, boots on pipes, and a ridge vent cut in to match the soffit intake.
Ready for Inspection and the Next Trade
We walk the roof with you or the builder, clean the site, and leave everything ready for when the building inspector comes to look.
New Roofs for Englewood, Clayton, Union and the Northmont Area
We roof new structures across Englewood and next door in Clayton, Union, Vandalia, Trotwood and Phillipsburg. Families in the Northmont City Schools district adding a bedroom call us, and so do businesses building near the I-70 interchange. If your search was roof installation near me, or you went looking for new construction roofers near me because the builder's roofer fell through, give us a call and we will talk dates.
Phone (937) 335-7663, Monday to Friday, 8 to 5, or request a free estimate online for your new roof installation in Englewood.
What counts as new roof installation?
Any roof going onto a structure that has never had one: a new house, an addition, a garage, a workshop or a new commercial building. That is new construction roofing. Replacing a worn roof on an existing house is a different service that starts with a tear-off.
How early should I call about a roof for a new Englewood build?
When framing starts, or sooner. We like to see the roof plan early and hold a date for when the sheathing is done, so the deck does not sit uncovered.
Can the new roof match the house it is attached to?
On additions we match pitch, overhang and shingle style as closely as we can. If the existing roof is old and faded, a perfect color match may not be possible, and we will say so before you commit.
Do you install metal roofs on new garages and shops?
Yes. Standing seam and other metal panels are common on new garages and workshops. We work out panel lengths and trim from the plans so the right material arrives on day one.
What affects the price of a roof on a new Englewood home?
Roof area, pitch, material, the number of valleys and wall intersections, and how many openings need flashing. Access to the site matters too. We price from your plans and keep it upfront.
Can you coordinate siding and gutters after the roof?
Yes. Once the roof is on, our Englewood siding contractor team and gutter crew can follow, which keeps the flashing and trim details in one company's hands.
Does a brand-new roof need an inspection later?
It is smart to have one after the first winter. Framing settles and freeze-thaw cycles show weak spots early. Schedule a roof inspection in Englewood and we will check flashing, vents and fasteners.
Should I hire you directly or through my builder?
Either works. Many Englewood owners bring us in through their builder; others hire us directly for an addition or garage. Either way, we coordinate dates with whoever runs the site.
